RESANA

  • RESANA

RESANA

SURFACE AND APPLICATION REQUIREMENT :

New smooth, regular and non - absorbent plasters, surfaces without undulations do not need any special preparation. Such surfaces shall need a two coat application by brush.

During application the surface should be well protected from strong winds, hot sun and cold weather. Application should be carried out at a temperature over 5o c. The product is rain proof after eight hours and touch dry after one hour at a temperature of 20o c. The application equipment used should be immediately washed with water.

GET A QUOTE

    A. Surface Required Plain, cement sand / stone dust, plaster, gypsum, plywood Surfaces etc.

    B. Application By Block Brush & Smooth Roller

    C. Film Thickness 80 to 100 Microns

    D. Consumption Rate 2 to 2.5 Sq. Mtr. Per Kg. (Besides Prime Coat)

    E. Average Shade Life Upto 10 Years – except blue & green families which comparatively fade faster .

    F. Adhesion Permanent

    G. Textures Stipple Finish/Fine Crinked/Plain Brush Finish.

    DETAILS FOR ADOPTION AS TENDER ITEM :

Providing and applying acrylic aggregate textured wall coating in Spectrum pigmented Resana finish in shade No. * maintaining material consumption rate of average 2 to 2.5 Sq. Mtr. Per Kg. (Besides Prime Coat) and 90 Microns thickness on new walls in the exterior of the building. Undulations, broken edges, minor imperfections / irregularities should be rectified by using a paste made of Spectrum Rectochem Surface Improver mixed with ordinary portland cement in the ratio of 1:1. Old, flaking, plaster of paris, gypsum and highly absorbent surfaces and those already finished with lime or distemper should be brushed down and then treated with a coat of Spectrum Prime Coat diluted with water in the ratio 1:1 and applied by a brush.

    Download the PDF :